Plano Milling Series

Horizontal Milling Machine
CNC Double Column
Machining Center

Plano Grinder Series

 

 

 

CNC Double Column Machining Center - CMNC SERIES

CNC Double Column Machining Center - CMNC SERIES

CMNC-3020~CMNC-10030
Standard Functions and Accessories:
• CNC Square Type, 25 HP spindle motor(870 mm travel)
• FANUC 0iMD controller
• Spindle and gear box cooling system
• X/Y/Z axis with fine ground ball screw
• Automatic lubrication system
• Foot switch for spindle unclamping
• Telescopic cover at the front / rear of work table
• Dust shield cover for column
• Protection cover for cross beam
• Automatic hydraulic lock for vertical travel of cross beam
• Operation/maintenance manual
• Tool box and tool kit
• Coolant system
• Manual pulse generator
• Work lamp
• Pilot lamp
• RS232 connection port
• Coolant gun and water gun
• Air conditioner for electrical cabinet
• Leveling bolts and blocks
 
Optional Functions and Accessories:
• FANUC 31i controller
• 10 HP side milling head (NC control)
• Manual 90 right angle milling head
• Manual universal milling head
• Semi-auto bevel gear driven milling head
• Semi chip enclosure, chip auger, chip cart
• 300 mm raiser block
• 500 mm raiser block
• Linear scale
• Full chip enclosure with top roof
• Sliding door
• Rigid tapping
• Oil skimmer
• Preparation for oil hole holder
• Coolant through spindle
• Semi-automatic head attachment with 5index increment
• Pendant type control panel
• Automatic tool length measurement
 

Specifications
X-axis travel mm 3000 4000 5000
Y-axis travel mm 2000
Z-axis travel mm 870
W-axis travel mm 1300
Distance from spindle nose to table (Height) mm 1500
Between column mm 2050
Table area mm 3000x1500 4000x1500 5000x1500
T-Slot (W x pitch) mm 22
Max. table load kgs 10000 12000 14000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 ; 25 / 30 (opt)
Spindle speed (gear drive) rpm 3000
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 10000 / 10000 8000
Z-axis rapid traverse mm/min 8000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 55
Machine weight kgs 27500 30000 35000
Space occupied LxW mm 9980x5300 11300x5300 13300x5300
H mm 5800

X-axis travel mm 4000 5000 6000
Y-axis travel mm 2500
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1300
Distance from spindle nose to table (Height) mm 1700 (std) / 2000~3000 (opt)
Between column mm 2550
Table area mm 4000x2000 5000x2000 6000x2000
T-Slot (W x pitch) mm 22
Max. table load kgs 13000 16000 20000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 ; 25 / 30 (opt)
Spindle speed (gear drive) rpm 3000
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 10000 / 10000 8000
Z-axis rapid traverse mm/min 8000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 60 65
Machine weight kgs 48000 55000 59000
Space occupied LxW mm 12000x5900 13300x5900 15800x5900
H mm 6000(std)

X-axis travel mm 5000 6000 8000 10000
Y-axis travel mm 3000
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1300
Distance from spindle nose to table (Height) mm 1700 (std) / 2000~4000 (opt)
Between column mm 3050
Table area mm 5000x2500 6000x2500 8000x2500 10000x2500
T-Slot (W x pitch) mm 22
Max. table load kgs 18000 22000 32000 38000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 ; 25 / 30 (opt)
Spindle speed (gear drive) rpm 3000
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 8000 / 8000
Z-axis rapid traverse mm/min 8000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 75 100
Machine weight kgs 58000 66000 85000 102000
Space occupied LxW mm 13300x6400 15800x6400 20500x6400 25500x6400
H mm 6000(std)



CMNC-6035~CMNC-10055
Standard Functions and Accessories:
• CNC Square Type, 25HP spindle motor(870 mm travel)
• FANUC 0iMD controller
• Spindle and gear box cooling system
• X/Y/Z axis with line ground ball screw
• Automatic lubrication system
• Foot switch for spindle unclamping
• Telescopic cover at the front/rear of work table
• Dust shield cover for column
• Protection cover for cross beam
• Automatic hydraulic lock for vertical travel of cross beam
• Operation / maintenance manual
• Tool box and tool kit
• Coolant system
• Manual pulse generator
• Work lamp
• Pilot lamp
• RS232 connection port
• Coolant gun and water gun
• Air conditioner for electrical cabinet
• Leveling bolts and blocks

Optional Functions and Accessories:
• FANUC 31i controller
• 10HP side milling head(NC control)
• Manual 90 right angle milling head
• Manual universal milling head
• Semi-auto bevel gear driven milling head
• Semi chip enclosure, chip auger, chip cart
• 300 mm raiser block
• 500 mm raiser block
• Linear scale
• Full chip enclosure with top roof
• Sliding door
• Rigid tapping
• Oil skimmer
• Preparation for oil hole holder
• Coolant through spindle
• Semi-automatic head attachment with 5 index increment
• Pendant type control panel
• Automatic tool length measurement
 

X-axis travel mm 6000 8000 10000
Y-axis travel mm 3500
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1600
Distance from spindle nose to table (Height) mm 1700 (std) / 2000-4000 (opt)
Between column mm 3550
Table area mm 6000x3000 8000x3000 10000x3000
T-Slot (W x pitch) mm 22 / 28
Max. table load kgs 23000 35000 40000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 ; 25 / 30 (opt)
Spindle speed (gear drive) rpm 3000 (Gear type)
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 8000x8000 6000x8000 6000x8000
Z-axis rapid traverse mm/min 8000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 80 100
Machine weight kgs 76000 93000 115000
Space occupied LxW mm 15800x6900 20500x6900
H mm 6350(std) / 5800, 7300 (opt)

X-axis travel mm 6000 8000 10000
Y-axis travel mm 4200
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1600
Distance from spindle nose to table (Height) mm 1700 (std) / 2000-4000 (opt)
Between column mm 4250
Table area mm 6000x3200 8000x3200 10000x3200
T-Slot (W x pitch) mm 22 / 28
Max. table load kgs 25000 35000 40000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 ; 25 / 30 (opt)
Spindle speed (gear drive) rpm 3000 (Gear type)
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 8000x8000 6000x8000 6000x8000
Z-axis rapid traverse mm/min 8000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 90 100
Machine weight kgs 85000 110000 132000
Space occupied LxW mm 15800x7600 20500x7600 20550x7600
H mm 6350(std) / 6800, 7300 (opt)

X-axis travel mm 6000 8000 10000
Y-axis travel mm 5000
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1600
Distance from spindle nose to table (Height) mm 1700 (std) / 2000-4000 (opt)
Between column mm 5050
Table area mm 6000x4000 8000x4000 10000x4000
T-Slot (W x pitch) mm 22 / 28
Max. table load kgs 28000 35000 40000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 (25 / 30) (opt)
Spindle speed (gear drive) rpm 3000 (Gear type)
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 8000x6000 6000x6000 6000x6000
Z-axis rapid traverse mm/min 6000 6000 6000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 100
Machine weight kgs 105000 116000 138000
Space occupied LxW mm 15800x8300 20500x8300 25500x8300
H mm 6350(std) / 6800, 7300, 7900, 8600(opt)

X-axis travel mm 8000 10000
Y-axis travel mm 5500
Z-axis travel mm 870 (std) / 1200 (opt):800KMC (opt)
W-axis travel mm 1600
Distance from spindle nose to table (Height) mm 1700 (std) / 2000-4000 (opt)
Between column mm 5550
Table area mm 8000x4000 10000x4000
T-Slot (W x pitch) mm 22 / 28
Max. table load kgs 42000 42000
Spindle motor (cont./30 min) KW/HP 18.5 / 22 (25 / 30) (opt)
Spindle speed (gear drive) rpm 3000 (Gear type)
Spindle nose taper   BT-50
X, Y-axis rapid traverse mm/min 6000x6000 6000x6000
Z-axis rapid traverse mm/min 6000 6000
Cutting feed rate mm/min 5~5000
Hydraulic oil tank capacity L 200
Lubrication oil tank capacity L 20
CNC control   MITSUBISHI / FANUC
Air pressure kg/cm2 6
Power required KVA 100
Machine weight kgs 128000 148000
Space occupied LxW mm 20500x8900 25500x8900
H mm 6350(std) / 6800, 7300, 7900, 8600(opt)
No.152, Qinnong Ln., Guangming Rd., Wuri Dist., Taichung City 414, Taiwan
TEL:886-4-2337-2245 FAX:886-4-2337-9421
http://www.cyhmi.com E-mail:cyhs1972@ms77.hinet.net

Copyright © CHIN YUAN HSING MACHINE INDUSTRIAL CO., LTD. Hosted by Machinetools Directory (S & J Corp.), Plastic and Rubber Machine Directory.
KUN SHAN Office
KUN SHAN CHIN YUAN HSING PRECISION MACHINE CO., LTD.
No. 699, Yishen Rd., Shipai Kunshan, Jiangsu.
TEL:86-512-5768 6698
FAX:86-512-5768 0289
chinyuanhsing@126.com


KUN SHAN ENERGY WAY MACHINERY CO., LTD.
TEL:86-512-5768 7508
SALES DEPT. EXT.112
FAX:86-512-5768 7500
Website:www.ylwjx.cn
ATTN: MR. LIN 13382529058
ksylw@cyhmi.cn